Filters for Full Face Masks and PAPR

Filters for Full Face Masks and PAPR

Respiratory protection with filters is dependent on the ambient air. In order to use filtering respirators, the type, properties and composition of the hazardous agent in the ambient air must be known. The oxygen content in the inhalation air must be at least 17 vol.%. When using particle filters, no hazardous gases must be present; when using gas filters, no hazardous particles. In case of doubt combined filter must be used. See also our Filter Selection Guide.

Gas Filters 90

For protection against organic or inorganic gases and vapours, according to the required protection range. Gas filter classes 1 or 2, single or multiple range filter [ABEK]. The 9X series of MSA gas and combination filters are in full compliance with the REACH regulation and do not include any toxic materials listed in the European Regulation.

Combination Filters 92

For protection against organic or inorganic gases and vapours, as well as against solid and liquid particles [class P2]. Single and multiple range filters [ABEK/St]. The 9X series of MSA gas and combination filters are in full compliance with the REACH regulation and do not include any toxic materials listed in the European Regulation.

Combination Filters 93

For protection against organic or inorganic gases and vapours, as well as against solid and liquid particles [class P3]. Single [A, B, E, K, AX] range or - Multiple [AB, ABEK] range. The 9X series of MSA gas and combination filters are in full compliance with the REACH regulation and do not include any toxic materials listed in the European Regulation.

Special Filters

Particle Filters

Protection against solid and liquid particles of toxic agents

Legal Information

Contact